Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the window lifter of the Fiat Doblo?

Model: Fiat Doblo 223, MK 1, Doblo 1 - Years 2000-2009
Part: Side window

The disassembly of the electric window regulator of the Fiat Doblo and any adjustment of its ascent and descent, is exactly as shown in the video. Before reaching it, it is necessary to remove the internal paneling of the door, along with the handle, handle, etc. The screws of the handle must then be unscrewed, followed by the storage compartment, the speaker, taking care to disconnect the power cables and the handle, leading to the removal of the panel. Once this is done, all that remains is to unscrew the locking pins and pull out the window regulator.

Posted on 30 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Window Regulator Motor and Glass on the Fiat Doblò 2?
How to Replace the Window Regulator Motor and Glass on the Fiat Doblò 2?
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) In this video tutorial, we will see the instructions on how to remove and replace the window regulator motor and the side glass on the second series …
How to disassemble the front door panel of the Fiat Doblò
How to disassemble the front door panel of the Fiat Doblò
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) Today's instructions will show us how to disassemble and remove the front door panel of the Fiat Doblò. First, we open the front door of the vehicle …
Where are the fuses located in the Fiat Doblò?
Where are the fuses located in the Fiat Doblò?
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) The fuses in the Fiat Doblò are divided within the dedicated fuse boxes installed in the vehicle: these are located inside the cabin and in the engin…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos