Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Grease the Gear Lever Joints if the Engagements are Not Smooth

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Shifter boot

See other generations:
Video tutorial

In this video, you can see how to grease the gear lever joints of a Fiat Panda 169, where the gears do not engage smoothly. This could be an issue with the gearbox oil, but before undertaking a more complex and costly intervention, it is worth checking if the problem is simply due to the gear lever joints needing proper greasing and lubrication.

You can obtain high-quality grease on Amazon with the code B00YUIG61K, priced at £29.00 for a one-litre tub, with free delivery. Remove the gear lever gaiter and unscrew the screws holding the plastic frame; then, there are two bolts on the sides and two Torx screws on the sides of the console to remove.

This will expose the linkages, which you should grease carefully, moving them to ensure every joint is lubricated. Reassemble the console and then refit the gaiter, ensuring the lever moves perfectly and smoothly.

Now the lever operates flawlessly.


Updated on 16 October 2026 by ScegliAuto


Related tutorials

Fiat Panda Gear Oil Change
Fiat Panda Gear Oil Change
Fiat Panda (2003-2012 / 169, MK 2) Changing the gearbox oil is a maintenance task that is often overlooked. However, running the gears in clean oil with optimal lubricating properties …
Replace Headlight Bulbs on a Fiat Panda
Replace Headlight Bulbs on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Are the headlight bulbs on your Panda damaged? Not lighting up anymore? Here's how to change them. Open the bonnet by pulling the lever located at th…
How to replace the gear knob and gear lever gaiter of the Fiat Panda
How to replace the gear knob and gear lever gaiter of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) We will briefly see the step-by-step instructions on how to disassemble and replace the knob and the gear lever boot of the Fiat Panda. First, we get…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos