Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Engine Warning Light on a Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

Today, we will look at the instructions that will allow you to reset the engine warning light on a Fiat 500, as well as on other models from the manufacturer. First, get inside the vehicle and connect your diagnostic software to the car's OBD port; then select the make, model, and engine type, as shown in the video.

At this point, check the error present in the control unit and perform the reset (only if the problem has been resolved); then turn off the ignition and start the engine!


Updated on 17 October 2026 by ScegliAuto


Related tutorials

Fiat 500 (2014-2022 / 500 X) In this video tutorial, learn how to reset the maintenance warning light for the oil change on the Fiat 500 X. First, get inside the vehicle and conn…
Fiat 500 (2007-2022 / 312) Below, we will see how to reset the service light for the engine oil change on the Fiat 500 Abarth. First, get into the vehicle and connect your diag…
Fiat 500 (2014-2022 / 500 X) Follow these simple steps to reset the maintenance light for the engine oil change on the Fiat 500X. After completing the service, you need to reset …

    Frequently Asked Questions

    • 500 2007-2021 - What does the S warning light on the Fiat 500 indicate? Read answer
    • 500 2007-2022 - What warning lights are there in the dashboard of the Fiat 500? Read answer
    • 500 2014-2022 - What does the "driving mode not available" error mean on my Fiat 500X? Read answer
    • 500 2007-2024 - The "radio blocked wait" error appears on the radio of my Fiat 500, how can I unblock it? Read answer
    • 500 2007-2024 - What does the "Hill holder / ESP not available" warning light mean in the Fiat 500? Read answer
    • 500 2012-2023 - What does the warning triangle with the exclamation point mean on the FIAT 500? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos