Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Ecosport
    4. : Tires

Ford Ecosport - Tires

Ford Ecosport (2012-2023 / MK 1, BK)
How to reset the tire warning light in the Ford EcoSport?
In this tutorial we can see how to reset the tire warning light in the Ford EcoSport, a very simple and fast operation. Before doing this, make sure you have …read all…
Posted on 3 October 2022 by ScegliAuto
Ford Ecosport (2012-2023 / MK 1, BK)
Reset the Ford Ecosport tire pressure sensors
With this guide we are going to reset the tire pressure sensors. Let's go and check the tire pressure and, if necessary, restore the correct value (which we …read all…
Posted on 20 November 2022 by ScegliAuto
Ford Ecosport (2012-2023 / MK 1, BK)
How to reset the tire pressure warning light in the Ford Ecosport
In this video we will see how to reset the tire pressure warning light that appeared on the instrument panel of the small Ford SUV, or the Ecosport. We operate …read all…
Posted on 21 March 2024 by ScegliAuto
Airbags (1) Car stereo (5) Battery (8) Spark plugs (2) Control unit (1) Key (19) Locking the trunk (2) Timing belt (4) -board computer (5) Checks and maintenance (44) Brake discs (2) Headlight (1) Tail light (2) Fog lights (3) Air filter (1) Cabin air filter (17) Diesel filter (1) Oil filter (1) Hand brake (3) Grille (2) Window lift switch (1) Light bulb (1) Headlight bulb (9) Rear light bulb (8) Interior lights ceiling light bulb (2) Handle (1) Engine (1) Engine oil (4) Door panel (8) Front bumper (1) Tires (3) Push button (1) Instrument cluster (7) Fuse box (8) Seat (1) Lock (1) Outside rearview mirror (2) Drums and shoes (1) Central tunnel (1)

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos