Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the camshaft position sensor located in the Ford Focus?

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Checks and maintenance

In this video we can see where the camshaft position sensor is located in the Ford Focus and how to proceed in case we need to replace it, a very simple operation. As shown, the sensor in question is located in the upper area of the engine, on the driver's side. Before disassembling it, make sure the engine is completely cool, then open the hood and remove the plastic cover. Then disconnect the indicated connector, unscrew the fixing bolt with an 8mm socket wrench and remove the sensor from the housing. To install the replacement, simply follow the reverse procedure.

Posted on 1 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the camshaft position sensor located in the Ford Focus?
Where is the camshaft position sensor located in the Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) In this video, you will see where the camshaft position sensor is located in the Ford Focus and how to proceed if you need to replace it, a very simp…
Replacing the camshaft sensor on a Ford Focus 1.6i 16V
Replacing the camshaft sensor on a Ford Focus 1.6i 16V
Ford Focus (1998-2004 / MK 1) Today, you will learn how to remove the camshaft speed sensor on a Ford Focus 1.6i 16 valve, first series. First, open the bonnet of your car and rem…
How to Replace the Camshaft Sensor in a Ford Focus?
How to Replace the Camshaft Sensor in a Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) As shown in this tutorial, replacing the camshaft sensor in the Ford Focus is an extremely simple and quick task. First, wait for the engine to cool …

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos