Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Belt and Tensioner Pulley on a Ford Mondeo

Model: Ford Mondeo / Fusion MK 2 - Years 2000-2007
Part: Timing belt

In this detailed video, learn how to remove and replace the belt and tensioner pulley on a Ford Mondeo. Lift the car on a column lift and remove the wheel, then use a socket wrench to detach the right wheel arch liner. Use a spanner to loosen the tensioner pulley and slide the belt off its seat. With a socket wrench, unscrew the tensioner pulley bolt and remove it from the engine bay. Fit the new tensioner and belt, tightening everything with the spanner. Finally, reattach the wheel arch liner and refit the wheel with the tyre onto the vehicle.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Belt on a Ford Mondeo
How to Replace the Timing Belt on a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) To replace the timing belt on a Ford Mondeo, lift the car with a jack so that the bolts securing the front right wheel can be loosened; completely re…
How do you replace the timing belt of the Ford Mondeo?
How do you replace the timing belt of the Ford Mondeo?
Ford Mondeo / Fusion (2014-2021 / MK 4) In order to replace the timing belt of the Ford Mondeo, you need to lift the car so that you can loosen the screws that secure the right front wheel:…
How to Replace the Timing Belt of the Ford Mondeo?
How to Replace the Timing Belt of the Ford Mondeo?
Ford Mondeo / Fusion (2007-2014 / MK 3) To replace the timing belt of the Ford Mondeo, open the bonnet to access the engine bay and remove the cover from its upper and side parts. The pulle…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos