Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Brake Light Bulb on a Ford Fiesta MK5

Model: Ford Fiesta MK V, MK 5, Fiesta 5 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Tail light

See other generations:
Video tutorial

In this video, you can see how to change the brake bulb in the rear light of a Ford Fiesta MK5: first, open the tailgate, and you will see that on the side of the catch, there are two clips next to the light unit that you need to remove to pull the light out of its housing.

It will be sufficient to apply some force to pull the entire light unit towards you, which will still be connected via the electrical connector.

Identify the bulb that needs to be changed and pull it out from the back of the light unit, remembering that the new bulb must never be touched with bare hands; doing so would halve its lifespan. Refit the light unit and screw the screws back in. If you need to change the third brake light, you will see that there are two rubber grommets just under the opening: remove them and use a screwdriver to release the spring that holds the third brake light cover, which will then easily come out of its housing.

You can then change the bulb easily and snap it back into place.


Updated on 31 October 2026 by ScegliAuto


Related tutorials

Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) Learn how to change the wishbone on a Ford Fiesta. Lift the car using a column lift and loosen the wheel nuts with a telescopic spanner. Use a socket…
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) Note that the vehicle shown in the uploaded tutorial video is a Ford Ka, but since this procedure is common to many cars, including the Ford Fiesta m…
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this video, we will see the main steps that will allow us to remove and replace the cabin fan on a fifth-generation Ford Fiesta. First, enter the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos