Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the automatic transmission of the Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

Following these brief steps, we will see how to reset the automatic transmission of the Ford Focus, following the instructions below. First of all, we get into the car and start the instrument panel; then we place the gearshift in the N (Neutral) position, as shown in the video.

At this point, we wait for the "transmission ready" message to appear on the instrument panel display, then turn off the instrument panel; wait about ten seconds before turning the panel back on, placing it in the P position and finally starting the engine!


Posted on 3 January 2025 by ScegliAuto


Related tutorials

How do you reset the automatic transmission of the Ford Focus?
How do you reset the automatic transmission of the Ford Focus?
Ford Focus (2011-2018 / MK 3) To completely reset the automatic transmission of the Ford Focus, it will be necessary to connect a diagnostic tool to the OBD port of the vehicle: t…
How to Reset the Automatic Gearbox in the Ford Focus?
Ford Focus (2018-2025 / MK 4) This tutorial shows you how to reset the automatic gearbox in the Ford Focus, a very simple and quick operation, for example, as a troubleshooting at…
How to Reset the Automatic Gearbox in the Ford Focus?
How to Reset the Automatic Gearbox in the Ford Focus?
Ford Focus (2011-2018 / MK 3) In this tutorial, we will see how to reset the automatic gearbox in the Ford Focus, an extremely simple and quick operation, for example as a trouble…

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos