Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster on a Ford C-Max

Model: Ford C Max MK 1 - Years 2003-2010
Part: Instrument cluster

How to remove the instrument cluster on a Ford C-Max? Watch this video carefully to see how to proceed with the correct removal. First, remove the plastic covering from the lower part of the instrument cluster, detaching it from the dashboard. Then, unscrew the securing screws located at the sides of the instrument cluster with a screwdriver. Remove the instrument cluster from the dashboard (disconnect the power cable). Once the piece is removed, fit a new one or replace the LEDs/bulbs in the cluster and reassemble it. Finally, proceed to install the piece following the steps performed earlier.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Instrument Cluster from a Ford C Max
How to Remove the Instrument Cluster from a Ford C Max
Ford C Max (2003-2010 / MK 1) How to remove the instrument cluster from a Ford C Max? Learn how to disassemble the parts: lower the steering wheel using the appropriate lever and …
How to Remove the Door Panel on the Ford C-Max?
How to Remove the Door Panel on the Ford C-Max?
Ford C Max (2010-2019 / MK 2) To remove the door panel on the Ford C-Max, first remove the red cap located at the bottom to loosen the screw underneath. Along with this, you will …
How to Reset the Service Light on a Ford C-MAX?
How to Reset the Service Light on a Ford C-MAX?
Ford C Max (2010-2019 / MK 2) In this tutorial, you will see how to reset the service light on a Ford C-MAX. This operation is very simple and should only be performed after compl…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos