Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster from a Ford C Max

Model: Ford C Max MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Instrument cluster

See other generations:
Video tutorial

How to remove the instrument cluster from a Ford C Max? Learn how to disassemble the parts: lower the steering wheel using the appropriate lever and remove the plastic covers under the instrument cluster (as shown in the video). Unscrew the securing screws of the instrument cluster with a screwdriver; after removing the screws, pull the piece out from the dashboard and disconnect the power cable located at the back of the instrument cluster.

Install a new part or replace the LEDs/bulbs in the cluster and reassemble it. Finally, reverse the assembly steps.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to Remove the Instrument Cluster on a Ford C-Max
How to Remove the Instrument Cluster on a Ford C-Max
Ford C Max (2003-2010 / MK 1) How to remove the instrument cluster on a Ford C-Max? Watch this video carefully to see how to proceed with the correct removal. First, remove the pl…
How to Remove the Door Panel on the Ford C-Max?
How to Remove the Door Panel on the Ford C-Max?
Ford C Max (2010-2019 / MK 2) To remove the door panel on the Ford C-Max, first remove the red cap located at the bottom to loosen the screw underneath. Along with this, you will …
How to Reset the Service Light on a Ford C-MAX?
How to Reset the Service Light on a Ford C-MAX?
Ford C Max (2010-2019 / MK 2) In this tutorial, you will see how to reset the service light on a Ford C-MAX. This operation is very simple and should only be performed after compl…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos