Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the lock cylinder in the Ford Transit van?

Model: Ford Transit MK 7 - Years 2006-2014
Part: Door lock

In this tutorial we can see how to disassemble the lock cylinder in the Ford Transit van, an extremely simple and fast operation. First of all, we open the door in which we will be working, then we remove the inner panel by unscrewing the relevant fixing screws. We then release the indicated metal clip, insert the key into the lock and rotate it clockwise. At this point, we press the small button located inside the cylinder, pull the key outwards and remove the cylinder from the door. To install the replacement, simply follow the reverse procedure.

Posted on 26 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the ignition cylinder in the Ford Transit van?
How to disassemble the ignition cylinder in the Ford Transit van?
Ford Transit (2006-2014 / MK 7) In this tutorial we can see how to disassemble the starter cylinder in the Ford Transit van, a very simple and quick operation. To do this, we will n…
How to Replace the Front Door Lock on the Ford Transit Van?
How to Replace the Front Door Lock on the Ford Transit Van?
Ford Transit (2006-2014 / MK 7) In this tutorial, learn how to replace the front door lock on the Ford Transit van, a very simple and quick operation. First, open the door you will …
How to Replace the Door Lock on a Ford Transit?
How to Replace the Door Lock on a Ford Transit?
Ford Transit (1994-2000 / MK 5) To replace the door lock on a Ford Transit, completely remove the door panel to access the internal fastening elements of the lock. Once the cable an…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos