Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Ignition Cylinder in a Ford Transit Van?

Model: Ford Transit MK 8 - Years 2014-2024
Part: Checks and maintenance

In this tutorial, you will see how to remove the ignition cylinder in a Ford Transit van, an extremely simple and quick operation. First, go to the driver's seat, then remove the lower cover of the steering column by undoing the two securing screws with a Torx T20 key. Next, locate the small indicated hole at the bottom of the ignition cylinder, insert a thin hex key into it, turn the key to the second position, and pull it outwards to extract the cylinder from its housing.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the radiator grille of the Ford Transit?
How do you remove the radiator grille of the Ford Transit?
Ford Transit (2000-2006 / MK 6) When a vehicle, in our case the Ford Transit, needs bodywork restoration, or revision of some electrical or mechanical parts, it is necessary to disa…
How to Remove the Rear Door Panel on the Ford Transit Van?
How to Remove the Rear Door Panel on the Ford Transit Van?
Ford Transit (2014-2024 / MK 8) In this guide, you will see how to remove the rear door panel on the Ford Transit van. First, remove the upper frame section by unfastening the inter…
How to remove the external handle on the Ford Transit van?
How to remove the external handle on the Ford Transit van?
Ford Transit (2006-2014 / MK 7) In this tutorial we can see how to disassemble the external handle in the Ford Transit van, an extremely simple and quick operation. First of all, we…

Other guides you may be interested in

    Frequently Asked Questions

    • Transit 2014-2024 - How do you access the secret menu of the Ford Transit Custom? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos