Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the trunk lock of the Ford C-Max

Model: Ford C Max MK 2 - Years 2010-2019
Part: Trunk lock

Today we will see the necessary information on how to disassemble and replace the latch or lock of the rear hatch of the Ford C-Max. First, we open the rear hatch of the trunk and start removing the inner lining, unscrewing the fixing screws; then we unscrew the screws of the trunk latch, disconnecting the cable and the electrical connector to remove it, as shown in the video. At this point, we install the new trunk latch, reassembling everything and checking both the opening and closing functions.

Posted on 23 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Ford C Max (2010-2019 / MK 2) In this video we will see what to do if the tailgate of the Ford C-Max does not open. It could be due to one of the fuses. This model of C-Max has th…
Ford C Max (2003-2010 / MK 1) This guide shows how to open the bonnet of the Ford C-Max Mk1. The operation will involve breaking the front grille of the vehicle. Using a screwdriv…
Ford C Max (2010-2019 / MK 2) Today, in this video tutorial, learn how to remove and replace the lock cylinder of the front door handle on the Ford C-Max. First, open the front do…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos