Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Ford C-Max

Model: Ford C Max MK 2 - Years 2010-2019
Part: Battery

Learn how to replace the battery on a Ford C-Max: open the boot of the car (in the C-Max, the battery is located at the rear) and uncover the fabric/plastic cover (located at the bottom of the boot). Using a suitable socket or spanner: unscrew the fastening bolts of the battery terminals (unscrew the two opposite poles) and disconnect them from the battery. Remove the old battery and prepare to install a new unit in the boot. Position the new battery and reconnect the previously disconnected terminals. Finally, check and test its correct operation.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery on a Ford C-Max
How to Replace the Key Battery on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Start by inserting the tip of a thin but sturdy tool into the slot on the top side of the key fob for your Ford C-Max, then lever it open. Next, dise…
How to replace the battery of the Ford C Max remote control
How to replace the battery of the Ford C Max remote control
Ford C Max (2010-2019 / MK 2) Today we will explain how to easily and quickly replace the battery of the Ford C Max car remote control. In case you are unable to replace the batte…
How to replace the battery of the Ford C-Max 2 key
How to replace the battery of the Ford C-Max 2 key
Ford C Max (2010-2019 / MK 2) Thanks to the steps described in this new guide, you will be able to replace on your own and correctly the small battery inside the key of your secon…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos