Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS light on the Ford F-Series

Model: Ford Ford Various
Part:

Today we will explain how to reset the TPMS light, related to tire pressure, on a 2008 Ford F series vehicle in two ways. The first reset method is manual. To reset the light manually, we need to turn on the vehicle's dashboard and press the brake pedal, then we need to turn off the dashboard while still holding the brake pedal. We repeat this step three times in a row. When the car emits a sound, we will have confirmation that the reset of the light was successful.

Posted on 26 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TPMS Light on a Ford Super Duty
How to Reset the TPMS Light on a Ford Super Duty
Ford Ford Various Today, see how to independently reset the TPMS light on a Ford Super Duty. To reset the light, turn on the ignition and press the brake pedal. From t…
How do you reset the tire pressure warning light on the Ford B-Max?
How do you reset the tire pressure warning light on the Ford B-Max?
Ford Ford Various In order to reset the tire pressure warning light on the Ford B-Max, you need to inflate the tires until they reach the recommended pressure level: t…
How to Reset the TPMS on Ford Vehicles with Start Button
How to Reset the TPMS on Ford Vehicles with Start Button
Ford Ford Various In this video, you will learn how to re-learn the TPMS on Ford vehicles that have a start button. This is necessary if you change one or more sensors…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos