Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light bulbs of the Ford Fiesta

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Light bulb

In this video, we will see how to change the bulbs of the rear light cluster of the Ford Fiesta MK7: the car must be turned off, then we open the trunk and, from the trunk seal, we pull out the carpet until we reach the cover corresponding to the rear light cluster, where we intend to replace the bulb; we will bend it until we have enough space to insert our hand. We will find a plastic cap that we will unscrew to release the light from the inside. Then we will remove the two external fixing screws on the rear light; at this point, we can remove the light, disconnecting the electrical connector. Now that we have the light in our hands, we can remove the part that contains the bulbs, to replace those that need it. We will have to press them and make them turn a quarter of a turn. Now we put everything back in place following the instructions in reverse.

Posted on 2 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear light and replace the bulbs of the Ford Fiesta
How to remove the rear light and replace the bulbs of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) The instructions in this guide will show us how to disassemble and replace the rear light and its bulbs of the Ford Fiesta. First of all, we open the…
Replacing the Rear Light Bulbs on a Ford Fiesta
Replacing the Rear Light Bulbs on a Ford Fiesta
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Today, we will go through the steps to remove and replace the rear light bulbs, including the stop light, reverse light, indicator, and fog light, on…
How to replace the rear lights on the Ford Fiesta?
How to replace the rear lights on the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this tutorial we can see how to replace the rear lights on the Ford Fiesta, a very simple and quick operation. First of all, make sure that the ke…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos