Do it yourself
Frequently asked questions about cars and motorcycles

How to program the remote control and key of the Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Key

In this guide, we will see the instructions that will allow us to program the remote control and key of the Ford Kuga. First, we get into the car with the key to be programmed, and start connecting our remote control programming tool; it will be able to communicate with the ECU, allowing us to program the key by sending the values with the same frequency, as shown in the video. At this point, we press and hold the remote control's lock and unlock button, thus also programming the central locking.

Posted on 24 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Ford Kuga (2012-2019 / C520, MK 2) Programming an "old style" remote on a 2014 Ford Escape/Kuga (with a blade key and 80-bit chip) is simple. Sit in the driver's seat and close the doo…
Ford Kuga (2020-2026 / MK 3) To replace the battery in the Ford Kuga remote, slide the button located at the top of the remote to release the key inside. After removing the key, …
Ford Kuga (2012-2019 / C520, MK 2) To replace the battery of the Ford Kuga remote control, detach the cover on the back of the device, then also remove the key blade underneath: once t…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos