Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of a Ford Escape

Model: Ford Escape MK 4 - Years 2020-2026
Part: Key

Today we will see how to change the battery of the remote control of a fourth series Ford Escape. Let's start the procedure by removing the physical key from the remote control by pressing the appropriate unlock button and extracting it as shown in the video, then, using a small flat screwdriver, we remove the back cover of the remote control. Once this is done, we can remove the old battery from its slot and replace it with a new one, inserting it with the positive side facing upwards, finally we close everything following the reverse procedure. The necessary battery is the CR2450 3V.

Posted on 1 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Key Battery in a Ford Escape
How to Change the Key Battery in a Ford Escape
Ford Escape (2020-2026 / MK 4) Replacing the button battery inside the smart key of the Ford Escape and other models produced during the same period is a very simple task, but it c…
How to Replace the Battery in a Ford Escape?
How to Replace the Battery in a Ford Escape?
Ford Escape (2008-2012 / MK 2) To replace the battery in a Ford Escape, lift the hood to access the engine compartment. The battery is located near the left headlight; to remove it…
How to Replace the Battery in a Ford Escape?
How to Replace the Battery in a Ford Escape?
Ford Escape (2001-2007 / MK 1) To replace the battery in a Ford Escape, open the hood to access the components inside the engine compartment. The battery is located at the bottom r…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos