Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the radio of the Ford Explorer 5

Model: Ford Explorer MK 5, U502 - Years 2011-2019
Part: Car stereo

If you want to disassemble the factory radio in your Ford Explorer Mk5 on your own, all you have to do is read the following guide and follow all the steps described. First, go inside the car and proceed with the removal of the two plastic panels located on the sides of the radio. After removing them, disassemble the entire plastic panel of the central console and unscrew all the screws around the radio. At this point, pull the radio towards you and disconnect the electrical connector located in the rear area to complete the procedure.

Posted on 8 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from the Ford Explorer Mk3
How to Remove the Radio from the Ford Explorer Mk3
Ford Explorer (2002-2005 / U152, MK 3) This guide shows how to remove the radio from the Ford Explorer Mk3. First, detach the finishing trim of the radio console using a trim removal tool.…
How to Remove the Radio from the Ford Explorer
How to Remove the Radio from the Ford Explorer
Ford Explorer (2006-2010 / U251, MK 4) To remove the radio, start by removing the automatic gear console. Remove the retaining pins and then, using a plastic trim tool, detach the plastic …
How to replace the cabin filter in the Ford Explorer 6
How to replace the cabin filter in the Ford Explorer 6
Ford Explorer (2020-2026 / U625, MK 6) In this new guide dedicated to your new Ford Explorer Mk6 (2020-2022), discover how to replace the cabin air filter independently and safely. The ent…

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos