Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter of the Ford Focus 3

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Air filter

See other generations:
Video tutorial

Replacing the air filter of the Ford Focus model 3 independently is a simple and quick operation to perform. Let's start by opening the front hood and using a 7mm key to unscrew the screws on the flange cover to open it and remove the filter.

Clean the filter housing with a dry cloth and insert the new filter inside. Close the flange cover and tighten the screws with the 7mm key. Close the front hood of the car and turn on the instrument panel to check that no warning lights are on and that the filter has been correctly installed.


Posted on 6 July 2025 by ScegliAuto


Related tutorials

How to Remove the Diesel Filter from a Ford Focus
How to Remove the Diesel Filter from a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Before you can start, open the bonnet of your Ford Focus. Begin by unclipping and removing the upper engine cover. Next, unscrew and remove the bolts…
Replacing the Diesel Filter on a Ford Focus
Replacing the Diesel Filter on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Do you want to replace the diesel filter on your Ford Focus? Let’s look at removing the filter. Locate the diesel filter as shown in the video. Disco…
Replace the Diesel Filter on a Ford Focus
Replace the Diesel Filter on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Do you want to replace the diesel filter on a Ford Focus? Follow these steps to remove the filter effectively. First, lift the bonnet and secure it. …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos