Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Diesel Filter on a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Diesel fuel filter

Do you want to replace the diesel filter on a Ford Focus? Follow these steps to remove the filter effectively. First, lift the bonnet and secure it. Once you locate the fuel filter, disconnect it from the hoses and connectors. Use a spanner to undo the securing bolts of the upper cover of the filter, and remove the central bolt on the filter (if present). Pull out the worn filter and refit the cap with the new filter attached. Reinstall the filter holder in the engine bay with all its components (hoses and power cables).

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Diesel Filter from a Ford Focus
How to Remove the Diesel Filter from a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Before you can start, open the bonnet of your Ford Focus. Begin by unclipping and removing the upper engine cover. Next, unscrew and remove the bolts…
Replacing the Diesel Filter on a Ford Focus
Replacing the Diesel Filter on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Do you want to replace the diesel filter on your Ford Focus? Let’s look at removing the filter. Locate the diesel filter as shown in the video. Disco…
How to Replace the Fuel Filter on a Ford Focus MK3 2.0 TDCi
How to Replace the Fuel Filter on a Ford Focus MK3 2.0 TDCi
Ford Focus (2011-2018 / MK 3) This video provides instructions for removing and replacing the fuel filter on a Ford Focus MK3 2.0 TDCi in simple steps. First, open the bonnet of y…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - How much does it cost to replace the diesel filter on the Ford Focus 1.6 tdci? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos