Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the BMS module of the Ford Focus?

Model: Ford Focus MK 4 - Years 2018-2025
Part: Checks and maintenance

The car visible in the video is a Ford Focus, the same one we will discuss regarding the reset of the bms module mentioned. This module is responsible for monitoring the vehicle's power battery, and if it were to create problems, causing the battery light to come on, it can be reset in the hopes that this will solve everything. We turn on the dashboard, the low beams, activate the high beams five times in a row, and press the brake pedal three times. After performing this sequence, the aforementioned battery light will flash and shortly after, it will turn off.

Posted on 14 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Ford Focus (2018-2025 / MK 4) By Bms module, we mean the device that controls and manages the work of the power battery of the car, in this specific case of the Ford Focus, visibl…
Ford Focus (2018-2025 / MK 4) In this tutorial, you will see how to reset the BMS module in a Ford Focus, which is the battery monitoring and management system. This simple operat…
Ford Focus (2011-2018 / MK 3) In this short guide, we will see the instructions that will allow us to reset the BMS of the Ford Focus, in simple and quick steps. First of all, we …

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos