Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the interior panels - front and rear - of the Ford F150 MK14

Model: Ford F-150 MK 12 - Years 2009-2014
Part: Door trim panel

In this video, we will see how to remove the interior panels of the Ford F150 MK14: we will start with the front one, where we will remove the handle protection to take out the screw inside; we will do the same for the handle, where we find a small plastic square to remove, hiding a screw. In the rear part of the panel, we will find two more screws, and after removing them, we can take the panel from the bottom and push it upwards to remove it. As for the rear one, we need to start with the plastic coverings in the rear part of the window, where we find a screw that needs to be removed with a plastic spatula. Then we will remove the same screw inside the handle and the usual two screws at the bottom of the panel, after which - like the front one - we can pull it up.

Posted on 16 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the BMS of the Ford F150
Resetting the BMS of the Ford F150
Ford F-150 (2021-2026 / MK 14) In this video, we see how, after replacing the battery of the Ford F150, it is good practice to reset the BMS system, which is responsible for monito…
How to Replace the Key Fob Battery for the Ford F150
How to Replace the Key Fob Battery for the Ford F150
Ford F-150 (2021-2026 / MK 14) This video tutorial shows the procedure to replace the key fob battery for the Ford F150. First, remove the emergency key by pressing the button loca…
Air filter replacement for the Ford F150
Air filter replacement for the Ford F150
Ford F-150 (2021-2026 / MK 14) To replace the air filter that feeds the engine of the Ford F150, we open the hood of the engine compartment and secure it with the appropriate rod. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos