Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the console and the central tunnel of the Ford Galaxy

Model: Ford Galaxy MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Center console tunnel

See other generations:
Video tutorial

The following steps will show us how to disassemble the console and the central tunnel of the Ford Galaxy. First, we get into the cabin and start by detaching and removing the plastic cover found on the top of the central tunnel, also detaching the cover at the base of the gear lever; then we unscrew all the fixing screws to remove the central tunnel, removing the two partitions located at the bottom of the dashboard.

At this point, we carry out the repair or replacement of the central console, following the order of reassembly of all components.


Posted on 1 September 2025 by ScegliAuto


Related tutorials

Replacement of the timing belt of the Ford Galaxy 2.0 TDCi
Replacement of the timing belt of the Ford Galaxy 2.0 TDCi
Ford Galaxy (2006-2015 / MK 2) Today we will discover the instructions that will allow us to disassemble and replace the timing belt of the Ford Galaxy 2.0 TDCi. First, lift the ve…
How to Replace the Standard Radio in a Ford Galaxy
How to Replace the Standard Radio in a Ford Galaxy
Ford Galaxy (2015-2023 / MK 3) The instructions in this guide will help you remove and replace the standard radio in a Ford Galaxy. First, get inside the vehicle and start by remov…
How to Remove the Radio from a Ford Galaxy
Ford Galaxy (2006-2015 / MK 2) Before you can start, sit in the driver's seat of your Ford Galaxy. Begin by prising off and removing the radio trim to expose the fixing screws. Nex…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos