Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil change reset on a Ford Kuga

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Service warning light

In this very short tutorial today we can see the entire procedure necessary to perform in a very simple and fast way the reset of the service light, that is the oil change light, on a Ford Kuga, first generation model produced from 2008 to 2013. Let's start the operation immediately by turning on the car's ignition without starting it and wait for the dashboard check, then we have to press and hold down the brake and accelerator pedals simultaneously for about 20/30 seconds until the reset notification is complete as shown in the video.

Posted on 11 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) The following video tutorial explains how to reset the engine oil light on a Ford Kuga model 2, independently. After completing all the steps related…
Oil Change Reset on a Ford Kuga
Oil Change Reset on a Ford Kuga
Ford Kuga (2020-2026 / MK 3) This brief tutorial will show you how to reset the oil change indicator on a Ford Kuga, a model in production since 2020. Start by turning on the ign…
Oil change reset on a Ford Kuga
Oil change reset on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) .. see the entire procedure necessary to perform an oil change reset on a Ford Kuga, second generation model produced from 2012 to 2019. Very well, first.. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos