Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the pollen filter for the Ford S-Max

Model: Ford S Max MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Cabin air filter

See other generations:
Video tutorial

Below we will see the instructions that will allow us to disassemble and replace the cabin air filter or pollen filter of the Ford S-Max. First, we get on board the cabin, passenger side, and start removing the trim found at the bottom; then we lower the fuse box to remove it, then unscrew the two screws of the pollen filter box cover, as shown in the video.

At this point, we remove and replace the cartridge with the new one, inserting it in the correct direction; finally, we reassemble the filter cover and secure the fuse box.


Posted on 18 September 2025 by ScegliAuto


Related tutorials

Replacing the Diesel Filter on a Ford S-Max 2.0 TDCi
Replacing the Diesel Filter on a Ford S-Max 2.0 TDCi
Ford S Max (2006-2016 / MK 1) In this video tutorial, you will see how to remove and replace the diesel filter on a Ford S-Max 2.0 TDCi. First, open the engine bonnet and remove t…
Where is the fuel filter located on the Ford S Max and how do you replace it?
Where is the fuel filter located on the Ford S Max and how do you replace it?
Ford S Max (2006-2016 / MK 1) The fuel filter on the Ford S Max is located inside the front hood of the vehicle, specifically near the fuel pump and engine. If necessary, the repl…
How to Replace the Fuel Filter on a Ford S-Max 2.0 TDCi
How to Replace the Fuel Filter on a Ford S-Max 2.0 TDCi
Ford S Max (2006-2016 / MK 1) In this video, we will see the steps to remove and replace the fuel filter on a Ford S-Max 2.0 TDCi, but also on the Galaxy and Ford Kuga with the sa…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos