Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the fan in a Ford Fiesta MK7?

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Blower motor

Replacing the fan in a Ford Fiesta MK7 is not complicated, but it requires a bit of patience. First of all, disconnect the battery for safety. Then remove the front grille and bumper, so you can better access the fan assembly. Once done, locate the screws that secure the fan to the radiator, disconnect the electrical connector and carefully remove the entire unit. Be careful not to force it: some clips may resist. Install the new fan following the steps in reverse, making sure everything is securely in place. Once the bumper is reinstalled, reconnect the battery and start the car to verify that the fan is working. If you hear the classic "whoosh" when the engine heats up, mission accomplished! If you need a mechanic to do that job, contact a reliable garage.

Posted on 8 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Where are the radiator fan relays located on a Ford Fiesta?
Where are the radiator fan relays located on a Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) If the radiator fan on your Ford Fiesta has suddenly stopped working, first check the status of the respective relays, as indicated in this video. Th…
How to Replace the Cabin Fan on a Ford Fiesta?
How to Replace the Cabin Fan on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the cabin fan on a Ford Fiesta, open the glove compartment and detach the pins inside so it can be completely removed. Next, proceed to de…
How to Remove the Cabin Fan Resistor on Ford Fiesta 1.4
How to Remove the Cabin Fan Resistor on Ford Fiesta 1.4
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Is the cabin ventilation fan not working? Let's see how to remove the fan resistor on a Ford Fiesta. Open the car door and unlock the front bonnet. L…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos