Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the pressure sensors of a Ford Ranger (and Mazda BT50)

Model: Ford Ranger P703, RA - Years 2022-2026
Part: Checks and maintenance

Let's see how the procedure works to relearn/reset the TPMS sensors for Ford Ranger/Mazda BT50 using an inexpensive relearning tool. To start the vehicle's learning mode, take the driver's seat and press and release the brake pedal. Turn the ignition on and off three times in a row, ending with the ignition on and the dashboard lights illuminated. Press and release the brake pedal again. Repeat the ignition on and off procedure three times, but this time end in the "off" position (everything off). If we have correctly followed the sequence, we will hear a "beep" from the car's horn: this indicates that the vehicle has entered the sensor learning mode. We will also see the TPMS symbol flashing and a message like "Train LF tire": the car is ready. Now, bring the relearning tool close to the valve of the left front sensor. Press the button and hold it down: we will hear a short "beep" from the horn confirming that it has received the signal. Repeat the procedure for each tire following the correct order: right front / right rear / left rear. To exit the mode, simply turn off the ignition and start the vehicle normally. Drive for a few minutes until the system updates the new pressures.

Posted on 8 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure light on the Ford Ranger?
How do you reset the tire pressure light on the Ford Ranger?
Ford Ranger (2011-2023 / T6, P375, PX) It will be possible to reset the tire pressure warning light of the Ford Ranger by first inflating the tires to the recommended pressure value: this …
Where Are the Fuses on a Ford Ranger?
Ford Ranger (1983-1992 / MK 1) The exact location of the fuses on a Ford Ranger is shown in the vehicle's owner's manual. However, since this model is quite old, it is likely that …
Where is the fuse box of the Ford Ranger located?
Where is the fuse box of the Ford Ranger located?
Ford Ranger (1993-1997 / MK 2) To find the fuse box inside your Ford Ranger, you must follow the steps described in this new mini guide dedicated to you. First of all, you must ope…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos