Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Oil on Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Engine oil

Want to replace the oil and filter on a Ford Fiesta? Watch this video to see how to proceed: lift the bonnet and secure it, then remove the cap from the cylinder head; lift the car on a column lift or jack, undo the oil sump bolt, allow the fluid to drain into a disposal container, and refit the oil sump bolt. Using a strap wrench, unscrew the oil filter and remove it (fit the new part). Finally, top up with the new fluid, and check the oil level multiple times with the metal dipstick until the ideal measurement is reached.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the Ford Fiesta
How to reset the oil light on the Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) When the oil light comes on in a Ford Fiesta, it means that it is necessary to replace the vehicle's motor oil and only then reset the light. To rese…
Engine Oil Change on Ford Fiesta
Engine Oil Change on Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Replacing the worn filter and oil on a Ford Fiesta? Here's how to replace the filter and oil. Open the car door and pull up the engine compartment re…
How to Remove the Oil Pump on the Ford Fiesta MK5 1.4 TDCI
How to Remove the Oil Pump on the Ford Fiesta MK5 1.4 TDCI
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video tutorial, you will see the main instructions on how to remove and replace the oil pump on the fifth series Ford Fiesta, with a 1.4 TDCI…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos