Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil Filter and Oil on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Oil filter

See other generations:
Video tutorial

In this video, we will see how to replace the oil filter and the oil itself: open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it (lift the car with a jack or column lift if necessary).

Using a socket, unscrew the large bolt of the oil filter.

Remove the worn oil filter, unscrew the drain bolt from the oil sump (allow the used oil to drain into a container), and then re-tighten it. Install a new filter in the appropriate location. Finally, top up the engine oil. Close the front bonnet last.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

Engine Oil Change on Ford Fiesta
Engine Oil Change on Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) Replacing the worn filter and oil on a Ford Fiesta? Here's how to replace the filter and oil. Open the car door and pull up the engine compartment re…
Where is the Oil Filter on a Ford Fiesta?
Where is the Oil Filter on a Ford Fiesta?
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) The oil filter on Ford Fiesta vehicles from the 2000s is located next to the oil sump, both situated at the bottom of the car. To access the filter a…
How to Replace the Engine Oil Filter on a Ford Fiesta
How to Replace the Engine Oil Filter on a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) How to replace the engine oil filter on a Ford Fiesta? Here’s how to proceed with the replacement: lift the car with a column lift and unscrew the pl…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos