Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset of the tire pressure warning light for the Ford Mondeo

Model: Ford Mondeo / Fusion MK 4 - Years 2014-2021
Part:

Today's instructions will guide us through resetting the tire pressure warning light on the Ford Mondeo. Before carrying out the reset of the TPMS sensors, it is necessary for all four tires to be at the correct operating pressure. So, let's get in the car and start by turning on the instrument panel; then we use the steering wheel controls to navigate to the vehicle settings and then to the tire pressure option, as shown in the video. At this point, we confirm and perform the recalibration of the TPMS sensors, thus resetting the warning light on the instrument panel!

Posted on 3 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Pressure Warning Light on a Ford Mondeo
Resetting the Tyre Pressure Warning Light on a Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) In this short video tutorial, you will see the instructions to reset the tyre pressure warning light on a Ford Mondeo. Before performing any operatio…
Resetting the Tyre Pressure Warning Light on the Ford Mondeo MK4
Resetting the Tyre Pressure Warning Light on the Ford Mondeo MK4
Ford Mondeo / Fusion (2014-2021 / MK 4) In this tutorial video, you will see how to reset the tyre pressure warning light on the Ford Mondeo fourth series, from 2017; before performing the …
How to Reset the Tyre Pressure Light on the Ford Mondeo MK5
How to Reset the Tyre Pressure Light on the Ford Mondeo MK5
Ford Mondeo / Fusion (2014-2021 / MK 4) In this tutorial, you will learn how to reset or clear the tyre pressure light on the Ford Mondeo fifth generation. Before performing this operation,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos