Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure Warning Light on the Ford Mondeo MK4

Model: Ford Mondeo / Fusion MK 4 - Years 2014-2021
Part: Tire pressure warning light

In this tutorial video, you will see how to reset the tyre pressure warning light on the Ford Mondeo fourth series, from 2017; before performing the reset, ensure that all four tyres are at the correct operating pressure. Next, get into the vehicle and turn on the ignition; now navigate through the onboard computer menu using the arrows on the steering wheel until you reach the tyre monitoring section. At this point, press and hold the OK button to start the reset procedure; you will then see the warning light reset on the instrument cluster!

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Pressure Warning Light on a Ford Mondeo
Resetting the Tyre Pressure Warning Light on a Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) In this short video tutorial, you will see the instructions to reset the tyre pressure warning light on a Ford Mondeo. Before performing any operatio…
Reset of the tire pressure warning light for the Ford Mondeo
Reset of the tire pressure warning light for the Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) Today's instructions will guide us through resetting the tire pressure warning light on the Ford Mondeo. Before carrying out the reset of the TPMS se…
How to reset the tire pressure warning on the Ford Mondeo
How to reset the tire pressure warning on the Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) In this guide we will see the procedure for resetting the tire pressure warning on the Ford Mondeo; before resetting the TPMS sensors, it is necessar…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos