Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of the Ford Puma key.

Model: Ford Puma MK 1 - Years 2019-2026
Part: Key

Let's see how to change the battery of a Ford Puma remote control: we will need a CR2032 battery, which we can easily obtain for just a few euros. We open the key fob by pressing the two unlock buttons simultaneously, and while doing this, we pull out the emergency key. In the opening that has been created, we insert a thin screwdriver to separate the two halves of the plastic casing; inside, we see the CR2032 button battery, which we remove, paying attention to how it is inserted, because we will need to place the new one in exactly the same position. Now we reassemble the remote control casing and put the physical key back in its place. We perform a quick functionality test, and the operation is complete.

Posted on 3 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you change the battery of the key for the Ford Puma 2020?
Ford Puma (2019-2026 / MK 1) Very short video tutorial attached here to fully understand how to replace, in less than a minute, the battery of the key/remote of the Ford Puma and…
How to Replace the Key Battery of a Ford Puma
How to Replace the Key Battery of a Ford Puma
Ford Puma (2019-2026 / MK 1) Let's see how to change the battery of the remote for a Ford Puma. You will need a CR2032 battery (which can be found at any electronics store or eve…
How to replace the battery in the Ford Puma key
How to replace the battery in the Ford Puma key
Ford Puma (2019-2026 / MK 1) When the key for your second generation Ford Puma stops working, you don't necessarily need to think about buying a new one. In most cases, the probl…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos