Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on a Ford C-Max?

Model: Ford C Max MK 2 - Years 2010-2019
Part:

It will be possible to completely reset the tire pressure warning light on the Ford C-Max by inflating the tires to the recommended pressure value: this value is indicated on the sticker that is attached to the driver's door pillar. Once the inflation is done, you can navigate through the menu that will appear on the instrument panel: you need to select "Settings," then "Driver assist," and finally "Tyre monitor." At this point, you should press and hold the OK button located on the left steering wheel spoke to make the warning light disappear.

Posted on 4 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on the Ford C-Max.
How to reset the TPMS light on the Ford C-Max.
Ford C Max (2010-2019 / MK 2) In the following video tutorial, we will explain how to reset the TPMS warning light related to tire pressure monitoring on the Ford C Max. First, tu…
How to Reset the Tyre Pressure Warning Light on the Ford C Max
How to Reset the Tyre Pressure Warning Light on the Ford C Max
Ford C Max (2010-2019 / MK 2) If you notice that the low tyre pressure warning light illuminates while driving, check the actual tyre pressures and restore them to the manufacture…
How to reset the TPMS light on the Ford C Max II.
How to reset the TPMS light on the Ford C Max II.
Ford C Max (2010-2019 / MK 2) The reset of the TPMS warning light related to tire pressure must be performed after the tire pressure has been properly updated according to the man…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos