|
Do it yourself
| |||
| ||||
How to change the battery of a Ford Focus MK4
Model: Ford Focus
MK 4
- Years:
2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Video tutorial
The procedure for changing the battery in the Ford Focus MK4 is a bit more complex because the battery is semi-hidden under the air filter. First, let's locate the battery and disconnect the negative terminal, then remove the plastic support that is above the battery by unscrewing the torx screws that hold the support in place. Disconnect any electrical connectors and remove the support. Also disconnect the positive terminal, remove the side fastening, and then remove the air filter by unscrewing the 7 mm nut that secures the air hose to the filter, unlock the plastic clips, lift the entire air filter assembly, and move the whole assembly without disconnecting the MAF sensor. Now the battery is fully accessible and we can take it out. Clean the cable terminals, position the new battery with its side fastening, and connect the positive terminal first and then the negative one; reassemble the plastic support and then the air filter. Close the hood and start the car. If necessary, reset the settings (windows, climate, clock); the start & stop system may need a few driving cycles to reactivate.
Posted on 11 January 2026 by ScegliAuto
Related tutorials
Ford Focus
(2018-2025 /
MK 4)
In this video, we see how to change the battery of the Ford Focus: in this case, it is the ST Line, but the procedure is the same for all MK4 models:…
Ford Focus
(2018-2025 /
MK 4)
In the tutorial in question, we see how to replace the battery of the key remote for a Ford Focus car. First, take the key remote in hand and press t…
Ford Focus
(2018-2025 /
MK 4)
To change the battery of the Ford Fiesta/Focus key, you will need a small flathead screwdriver and a new battery (CR2032, 3 volts). Start by removing…
Other guides you may be interested in
|
How to Reset the Tire Pressure Light on a MG ZS?
On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.142
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |