Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the engine fuse box located in the Ford Mondeo 3?

Model: Ford Mondeo / Fusion MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Fuse box

See other generations:
This video is currently unavailable

In the following guide, you will find a description of the brief procedure you need to follow if you intend to access the fuse box of your Ford Mondeo third series. First of all, make sure to park the vehicle on a flat surface, then turn it off completely and go outside.

Immediately after, fully lift the hood and place the appropriate safety support. Finally, locate the fuse box on the right side and then remove the cover of the box with your hands to gain access to the fuses.


Posted on 15 January 2026 by ScegliAuto


Related tutorials

Where is the Fuel Temperature Sensor on the Ford Mondeo?
Where is the Fuel Temperature Sensor on the Ford Mondeo?
Ford Mondeo / Fusion (2014-2021 / MK 4) This video shows where the fuel temperature sensor is located on the Ford Mondeo and how to proceed if you need to replace it. As shown, the sensor i…
Where to Find the Fuse Box of a Ford Mondeo
Where to Find the Fuse Box of a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) In this short video tutorial, locate the three fuse boxes of a Ford Mondeo third generation, produced from 2010 to 2014, along with all the relevant …
What is the Fuse Diagram for the Ford Mondeo?
What is the Fuse Diagram for the Ford Mondeo?
Ford Mondeo / Fusion (2007-2014 / MK 3) In this video, you can see where the fuse boxes are located and their respective diagrams for the Ford Mondeo, useful in case you need to check the f…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos