Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin fan of the Ford Transit Connect

Model: Ford Connect MK 2 - Years 2013-2023
Part: Blower motor

In this guide, we will see the main instructions useful for disassembling and replacing the cabin fan of the Ford Transit Connect. First, let's open the driver's side front door and start removing the plastic panel located at the bottom, under the steering wheel; then we will disconnect the wiring of the cabin fan by unscrewing the fastening screws to remove it, as shown in the video. At this point, we will carry out the repair or replacement by installing the new original component; let's check the operation of the fan at various speeds.

Posted on 19 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery in a Ford Transit Connect
How to Replace the Key Fob Battery in a Ford Transit Connect
Ford Connect (2002-2013 / MK 1) The procedure to replace the battery in a Ford Transit Connect key fob is quite simple. Before you start, ensure you have the necessary materials: a …
How to Remove the Dashboard from a Ford Transit Connect
How to Remove the Dashboard from a Ford Transit Connect
Ford Connect (2002-2013 / MK 1) The instructions in this guide will show you how to remove and replace the entire dashboard of a Ford Transit Connect. First, get inside the vehicle …
How to replace the timing belt on the Ford Transit Connect 1.5 TDCi.
How to replace the timing belt on the Ford Transit Connect 1.5 TDCi.
Ford Connect (2013-2023 / MK 2) In this guide, we will go through the main steps on how to disassemble and replace the timing belt of the Ford Transit Connect 1.5 TDCi. First, let's…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos