Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Driveshaft with the Gaiter on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Axle shaft

Learn how to remove the driveshaft with the gaiter on a Ford Fiesta. Position your car on a column lift: raise it to a comfortable height for working, unscrew the wheel bolts (with a socket wrench or air drill) and remove the wheel. Next, begin unscrewing the large bolt of the brake disc with a socket wrench. Unscrew the bolts located under the disc and completely remove the wheel hub; pull the driveshaft with your hands (remove the bolts under the engine). Fit the new gaiter (after removing the old one) of the constant velocity joint, then begin to reassemble all the parts in reverse order.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Wheel Side Driveshaft Boot
Replacement of Wheel Side Driveshaft Boot
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) To replace the driveshaft's CV joint boot on the wheel side, it is necessary to extract the driveshaft from the hub and then the CV joint from the dr…
Removing Half Shaft from Ford Fiesta
Removing Half Shaft from Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this tutorial video, you will learn how to remove the front half shaft from a Ford Fiesta, specifically the ST model. First, secure the car and li…
How to Replace the CV Boot of the Ford Fiesta?
How to Replace the CV Boot of the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the CV boot of the Ford Fiesta, lift the corresponding wheel with a jack so that it is not in contact with the ground: then unscrew the bo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos