Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the clutch on a Ford Fiesta 1.2

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Clutch

Today's guide will show you the main instructions on how to remove and replace the clutch on a Ford Fiesta 1.2 petrol. First, lift the vehicle and begin removing the front wheels; then disconnect the left front driveshaft by unscrewing the fixing bolts, as shown in the video. At this point, remove the engine mount and start unscrewing the fixing bolts of the gearbox, removing it from the engine, as illustrated in the video. Now you can remove and replace the clutch with the original one, then reassemble the transmission!

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Clutch on the Ford Fiesta MK6 1.4
Replace the Clutch on the Ford Fiesta MK6 1.4
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In today's tutorial, you will learn how to dismantle and replace the clutch on the Ford Fiesta MK6 with a 1.4 petrol engine. First, lift the vehicle …
How to Replace the Clutch on a Ford Fiesta 1.4 TDCi?
How to Replace the Clutch on a Ford Fiesta 1.4 TDCi?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) To replace the clutch on a Ford Fiesta 1.4 TDCi, lift the car using a ramp so that you can remove the bolts securing the left front wheel. Next, disc…
How to Replace the Clutch on a Ford Fiesta
How to Replace the Clutch on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Before you can start, raise the front of your Ford Fiesta and remove the front wheels. Begin by removing the front half-shafts by unscrewing the resp…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos