Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Engine oil

Open the bonnet and ensure it is securely supported. Instead of draining it from the oil sump, you can vacuum the used oil with an appropriate suction system through the dipstick tube. Once the used oil is extracted, replace the oil filter cartridge located on the right side (when facing the engine): unscrew the plastic cap, remove the old cartridge, and insert the new one; before screwing the cap back on, apply the new O-ring seal and coat it with oil. At this point, fill the engine with new oil according to the SAE specifications and the quantities indicated in the user and maintenance manual.

Updated on 4 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Where is the Oil Filter on a Ford Fiesta?
Where is the Oil Filter on a Ford Fiesta?
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) The oil filter on Ford Fiesta vehicles from the 2000s is located next to the oil sump, both situated at the bottom of the car. To access the filter a…
Engine Oil Change on Ford Fiesta
Engine Oil Change on Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Replacing the worn filter and oil on a Ford Fiesta? Here's how to replace the filter and oil. Open the car door and pull up the engine compartment re…
How to Replace the Oil Filter and Oil on a Ford Fiesta
How to Replace the Oil Filter and Oil on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video, we will see how to replace the oil filter and the oil itself: open the car door and pull up the engine compartment release lever locat…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos