Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery of a Ford Transit MK8

Model: Ford Transit MK 8 - Years 2014-2024
Part: Battery

Let's see how to change the battery of the Ford Transit MK8. The battery is located under the driver's seat: pull the side lever to unlock the slide, slide the seat all the way back, and lean the backrest against the passenger seat to have maximum space. Unscrew the two 10 mm bolts that secure the plastic cover around the base of the seat. Pull it out towards the outside of the cabin. Disconnect the negative battery cable first, then the positive. Remove the securing bar; to extract the battery from the plastic tray, insert a spanner or flat screwdriver under the edge of the tray and gently lever upwards to lift the battery. Clean the terminals if they are corroded, insert the new battery, secure it with the bar, reconnect in reverse order: positive first and negative, and reposition the black plastic cover. Return the seat to its original position and start the vehicle to check its operation.

Posted on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Transit (2014-2024 / MK 8) If you own a Ford Transit Mk8 and are experiencing issues with the vehicle key, it is likely that the battery inside needs to be replaced. In the fol…
Ford Transit (2014-2024 / MK 8) In this video, you will see how to replace the battery on a Ford Transit MK8: in this vehicle, the battery is located under the driver's seat rather …
Ford Transit (2014-2024 / MK 8) The procedure required to correctly complete the battery replacement inside the key of your Ford Transit Mk8 is identical to that already used in sev…

Other guides you may be interested in

    Frequently Asked Questions

    • Transit 2014-2024 - Where is the battery in the Ford Transit? Read answer
    • Transit 2014-2024 - Where is the Ford Transit Custom battery located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos