Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Ford Kuga

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine oil

See other generations:
Video tutorial

To change the engine oil on a Ford Kuga, position the vehicle on a flat surface and safely lift it to access the underside of the engine. Place a container under the oil sump and remove the filler cap in the engine bay. Then unscrew the drain plug located under the sump and allow the used oil to drain completely.

Once the draining is finished, refit the drain plug and ensure the seal is in good condition. Pour the new engine oil through the filler neck using the specified quantity for the installed engine.

Check the level with the dipstick and add oil if necessary. Start the engine for a few seconds, turn it off, and check the level again, ensuring there are no leaks around the drain plug.


Posted on 7 June 2026 by ScegliAuto


Related tutorials

What does the "Change engine oil as soon as possible" message on the Ford Kuga indicate?
What does the "Change engine oil as soon as possible" message on the Ford Kuga indicate?
Ford Kuga (2012-2019 / MK 2, C520) When the message "Change engine oil as soon as possible" appears on the dashboard of the Ford Kuga, it means that the engine oil has degraded and nee…
Replacing the Oil Filter on Ford Kuga
Replacing the Oil Filter on Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) In this video tutorial, we will see how to remove the oil filter on a second-generation Ford Kuga. The oil filter is located under the vehicle: so li…
How to change the engine oil and filter in a Ford Kuga
How to change the engine oil and filter in a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) To replace the engine oil and filter in a Ford Kuga, it is advisable to bring the engine to operating temperature, then turn it off and safely lift t…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos