Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery of the Ford Kuga

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Battery

See other generations:
Video tutorial

Today, you will learn how to replace the battery of the Ford Kuga. To remove the battery, open the front bonnet and then pull off the top protective cover of the battery. Disconnect the airflow sensor by pulling the tab upwards and then disconnect the locking pin. Loosen the clip of the air duct hose.

Remove the air filter box to gain access to the battery cover. Disconnect the positive and negative terminals of the battery.

Unscrew the nut on top of the battery and remove the battery. Insert the new battery into the vehicle and connect the positive and negative connectors.

Then, screw the nut onto the bracket. Refit the air filter box and the air duct hose.

Reconnect the sensor and close the battery cover.


Posted on 25 July 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Ford Kuga
How to Replace the Battery in a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) To replace the battery in a Ford Kuga, open the bonnet to access the components in the engine bay. The battery is located on the right side and can b…
How to Replace the Battery in a Ford Kuga?
How to Replace the Battery in a Ford Kuga?
Ford Kuga (2012-2019 / MK 2, C520) To replace the battery in a Ford Kuga, open the bonnet to access the components located within the engine bay: the battery is located directly under …
How to Replace the Battery in a Ford Kuga?
How to Replace the Battery in a Ford Kuga?
Ford Kuga (2020-2026 / MK 3) To replace the battery in a Ford Kuga, open the rear tailgate to access the boot. Inside, lift the carpet to access the spare wheel, which must be re…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos