Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Windscreen Washer Pump on a Ford Fiesta

Model: Ford Fiesta Fiesta 4, Be91, MK 4, MK IV - Years 1996-2002
Part: Pump

How to remove the windscreen washer pump on a Ford Fiesta? Follow these steps carefully. The first step: lift the front bonnet of the car, then remove the plastic engine cover; use a screwdriver to unscrew the securing screws of the washer pump, and disconnect the power terminals (as shown in the video). Install the new windscreen washer pump and reconnect the power terminals to the connector in the engine bay. Tighten all screws of the washer pump and reassemble the engine soundproofing panel. Finally, test the correct operation of the washer.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Washer Pump and Reservoir on Ford Fiesta Mk4
How to Remove the Washer Pump and Reservoir on Ford Fiesta Mk4
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) In this video, follow the step-by-step instructions to remove the washer fluid pump and its reservoir on a Ford Fiesta Mk4. First, open the bonnet of…
How to Remove the Windscreen Washer Reservoir on a Ford Fiesta
How to Remove the Windscreen Washer Reservoir on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Let's see how to remove the windscreen washer reservoir on a Ford Fiesta. Lift the bonnet and secure it; remove the front headlamp in conjunction wit…
Refilling the Windscreen Washer Fluid on a Ford Fiesta
Refilling the Windscreen Washer Fluid on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This video shows how to unscrew the cap for refilling the windscreen washer fluid on a Ford Fiesta. Perform maintenance yourself to save on labour co…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos