Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to change the steering wheel of a Ford Focus

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Steering wheel
Operation: How to change the steering wheel of a Ford Focus

How to remove the steering wheel of a Ford Focus? Let's see in this video how to proceed with the disassembly of the piece. Before disassembling the car steering wheel, we disconnect the cables from the battery power supply. Using a screwdriver, unscrew the tightening screws of the side and lower steering wheel trim, then remove the airbag by unscrewing the screws (clips). Once the airbag has been removed: unscrew the central anchoring pin, before continuing, mark the tightening position with a marker (facilitates reassembly). Immediately afterwards we disconnect the power supply terminals and straiamo with the To reassemble everything, we proceed in reverse.


Posted on 22 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Focus 2004-2011 - What problems could the power steering of the Ford Focus 2 present? Read Answer
    • Focus 2004-2011 - What can cause a power steering failure in a 2006 Ford Focus? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos