Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Door Panel on Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Door trim panel

See other generations:
Video tutorial

Replacing the door panel on a Ford Focus, let's see how to remove and change it. Disconnect the battery terminals located in the engine bay. Remove the cover plastic from the handle. Using a screwdriver, unscrew the screws located in the handle.

Remove the trim plastic near the window and disconnect the speaker's electrical connector. Unscrew the remaining screws on the door panel and detach the retaining clips.

Finally, pull off the panel with your hands and unclip it from the door (disconnect the power wiring and the opening cable). Fit the new panel.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

How to Replace the Door Lock on a Ford Focus?
How to Replace the Door Lock on a Ford Focus?
Ford Focus (2011-2018 / MK 3) To replace the door lock on a Ford Focus, use a tool to pry off the window switch panel and the protective cover around the internal handle. Once the…
How to Remove the Door Panel on a Ford Focus
How to Remove the Door Panel on a Ford Focus
Ford Focus (2011-2018 / MK 3) How to remove the door panel on a Ford Focus? Here’s how to proceed. Before starting the disassembly, disconnect the battery terminals located in the…
Removing the Right Door Panel on a Ford Focus
Removing the Right Door Panel on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Carry out the removal of the front right door panel on a Ford Focus. Disconnect the battery terminals located in the engine bay, then using a screwdr…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos