Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Headlight Bulb Replacement Procedure on Ford C-Max

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

To carry out this procedure, follow the steps outlined in the vehicle guide to make it clear and achievable for every user of this site. First, locate the two screws that hold the entire headlamp in place and remove them.

Now, being careful not to apply too much force, take the entire headlamp out of its housing and proceed to disconnect the wires from the appropriate connector. At the back of the headlamp, you will see three openings, each for the respective bulb: position lights, main beam, and dipped beam.

From here, you will have easy access for the removal and replacement of the bulbs.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulbs on a Ford C Max
How to Replace the Front Headlight Bulbs on a Ford C Max
Ford C Max (2003-2010 / MK 1) How do you replace the front headlight bulbs on a Ford C Max? Follow this guide: open the bonnet of the engine compartment, remove the plastic inspec…
Replace Front Headlight Bulbs on Ford C-Max
Replace Front Headlight Bulbs on Ford C-Max
Ford C Max (2010-2019 / MK 2) Need to change the front headlight bulbs because they are damaged? Here’s how to remove them on a Ford C-Max. Open the front bonnet by pulling the le…
How to Replace the Front Headlight Bulbs on a Ford C-Max
How to Replace the Front Headlight Bulbs on a Ford C-Max
Ford C Max (2003-2010 / MK 1) Learn how to replace the front headlight bulbs on a Ford C-Max: open the front bonnet by pulling the lever located at the bottom right of the dashboa…

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos