Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Replacement of rear brake pads on Ford Focus

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Brake pads
Operation: Replacement of rear brake pads on Ford Focus

Replacing the rear brake pads? Let's see how the brake pads on the Focus are removed. We lift the car on a column bridge to the desired height, immediately after we go to remove the wheel (with a telescopic key) with the respective pins. We unscrew the locking pin of the brake caliper, remove the same from the wheel support. We disassemble the pads from the wheel hub caliper. We mount the new pads on the brake caliper. We mount the brake caliper above the brake disc. We tighten all the pins and mount the wheel. We replace worn pads on all Focus brakes.


Posted on 9 December 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos