Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Brake Pad Replacement

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Brake pads

Checking and replacing the brake pads is important as the efficiency of the braking system depends on them. To replace them, turn the steering wheel towards the side you wish to work on, making the calipers easily accessible. After lifting the car with a jack, take an Allen key and unscrew the bolts that secure the caliper to the hub at the rear. Once the bolts are removed, lift the caliper off the disc and press on the worn pipes to extract them. To insert the new pads, use a flat screwdriver to push back the piston.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Brake Pads on a Ford Focus
How to Change the Brake Pads on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Changing the brake pads on a Ford Focus? Let's remove the wheel and the pads. Unscrew the locking pin of the brake caliper and remove it from the whe…
Replacing Rear Brake Pads on Ford Focus
Replacing Rear Brake Pads on Ford Focus
Ford Focus (2011-2018 / MK 3) Replacing the rear brake pads? Here's how to remove the pads on the Focus brakes. Lift the car on a column lift to the desired height, then remove th…
Replacing the Rear Brake Pads on Ford Focus
Replacing the Rear Brake Pads on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Let's look at replacing the rear brake pads on a Ford Focus. Lift the car on a column lift to the desired height, then remove the wheel. Unscrew the …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos