Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Brake Disc on Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Brake rotors

Replacing a worn brake disc? Let's look at how to remove the brake disc on a Ford Focus. The first step is to remove the front wheel. Unscrew the bolts of the brake caliper to detach it from the bracket. Use a screwdriver to detach the brake pads. Remove the caliper bracket and unscrew the bolts on the brake disc with the appropriate tool. Pull the disc towards you to slide it off the hub. Install the new brake disc with all the associated bolts, tighten the caliper bracket to the disc and the pads, then mount the brake caliper, ensuring all bolts are securely tightened. Bleed the brake caliper. Mount the wheel and test the brakes.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Front Disc and Pads on Ford Focus
Replace the Front Disc and Pads on Ford Focus
Ford Focus (1998-2004 / MK 1) Replacing the brake disc and front pads on a Ford Focus, let’s see the disassembly. Lift the car with a jack to the desired height, then remove the w…
Replacing the Rear Brake Pads on Ford Focus
Replacing the Rear Brake Pads on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Let's look at replacing the rear brake pads on a Ford Focus. Lift the car on a column lift to the desired height, then remove the wheel. Unscrew the …
How to Replace the Rear Brake Pads on a Ford Focus?
How to Replace the Rear Brake Pads on a Ford Focus?
Ford Focus (2011-2018 / MK 3) To replace the rear brake pads on a Ford Focus, loosen the bolts securing the rear wheel and completely remove it. This will allow access to the brak…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos